Order via WhatsApp
Original 1000W 220/110V QUICK 861DW Heat Gun Lead Free Hot Air Soldering Station Microcomputer Temperature Rework Station
Quick 861DW ESD – Lead-free Hot Air Rework Station (1000W)
Quick 861DW ESD – Lead-free Hot Air Rework Station (1000W)
The Quick 861DW is an advanced Hot Air Rework Station with a 1000 W heating power. It is designed for professional soldering electronic SMD components using lead-free solders.
Features
* Three programmable channels CH1, CH2 and CH3 (for air volume and temperature parameters).
* Password protection and button lock function available.
* Magnetic switch in a stand can automatically puts the station into sleep mode when not in use.
* Easy real-time operation, auto sleeping function available, parameters can be set in sleeping mode.
* Closed loop sensor, temperature controlled by micro-computer zero trigger, large power, rapid temperature rising, temperature.
can be easily and accurately adjusted, not affected by airflow.
* Brushless vortex fan, wide range of airflow adjustable, suitable for many applications.
* Auto cooling function available, long lifetime ceramic heater.
* Three programmable channels CH1, CH2 and CH3 (for air volume and temperature parameters).
* Password protection and button lock function available.
* Magnetic switch in a stand can automatically puts the station into sleep mode when not in use.
* Easy real-time operation, auto sleeping function available, parameters can be set in sleeping mode.
* Closed loop sensor, temperature controlled by micro-computer zero trigger, large power, rapid temperature rising, temperature.
can be easily and accurately adjusted, not affected by airflow.
* Brushless vortex fan, wide range of airflow adjustable, suitable for many applications.
* Auto cooling function available, long lifetime ceramic heater.
1. This powerful station has an internal pump and heater to blow a steady stream of temperature controlled hot air to make it super easy to remove components, fix joints and jumpers, replace missing components, or just correct something you’ve done wrong.
2. The Quick 861DW matches up performance with hot air stations that cost twice as much! It’s great for beginners to experts thanks to its super-fast heat up time and easy to use button interface. You can save and restore ‘profiles’ so you have one for lead-free, lead, small chips or large. Comes with a nice stand and three different nozzles for different sized parts.
3. It has a closed-loop temperature control range between 100-500°C (212-932°F) and a digital display so you can easily tell what temperature the air’s blowing at. It has a power consumption of 1000W and an intelligent cooling system, so the airflow remains on until it gets to below 100°C. Max air flow is 100 L/minute – but for most work you’ll want to keep it a lot lower than that.
4. Just make sure to let the rework station heat up all the way before using it and be careful to use tools (and not your hands!) when using as it spits out, well, really hot air. Comes with three nozzles, use the smallest size you can get away with – it helps avoid damaging other components if you are trying to isolate one part of the board while avoiding a connector, for example.
2. The Quick 861DW matches up performance with hot air stations that cost twice as much! It’s great for beginners to experts thanks to its super-fast heat up time and easy to use button interface. You can save and restore ‘profiles’ so you have one for lead-free, lead, small chips or large. Comes with a nice stand and three different nozzles for different sized parts.
3. It has a closed-loop temperature control range between 100-500°C (212-932°F) and a digital display so you can easily tell what temperature the air’s blowing at. It has a power consumption of 1000W and an intelligent cooling system, so the airflow remains on until it gets to below 100°C. Max air flow is 100 L/minute – but for most work you’ll want to keep it a lot lower than that.
4. Just make sure to let the rework station heat up all the way before using it and be careful to use tools (and not your hands!) when using as it spits out, well, really hot air. Comes with three nozzles, use the smallest size you can get away with – it helps avoid damaging other components if you are trying to isolate one part of the board while avoiding a connector, for example.
|
Product Name
|
861DW Hot Air Gun
|
|
Condition
|
New
|
|
Applicable Industries
|
Welding
|
|
Video outgoing-inspection
|
Not Available
|
|
Machinery Test Report
|
Not Available
|
|
Marketing Type
|
New Product
|
|
Core Components
|
pcb board
|
|
Showroom Location
|
None
|
|
Place of Origin
|
Guangdong, China
|
|
Brand Name
|
quick
|
|
Dimensions
|
19*25*14cm
|
|
Usage
|
Welding
|
|
Key Selling Points
|
heating fast
|
|
Weight (KG)
|
5.5KG
|
Reviews
There are no reviews yet.